I found two bikes that resemble what I would like my final bike to look like. Most of the cafe racer projects leave the bike totally stripped down with either small modified fenders or no fenders at all. Also, since I will be riding with the Missus on the back of the bike I cannot go with the small cafe racer seat. I need to maintain a passenger friendly cafe look. These two bikes are pretty close in many regards:
This is a 1973 CL350 that was restored by Jonathan Wood. You can see more pictures of the details on his Flickr post.
This bike is great inspiration. I like the lower profile headlight and the fact that he kept the rear fender configuration with modified LED lights. I would have kept the original front fender and added rubber shock boots, but that’s just my style. He did a great job on this bike all around.
This next bike is a CB350
On this bike I like the fact that they kept the original front fender and I am a big fan of the rubber shock boots. The handlebars and gauges sit a little higher than I like and the seat back is too tall, not to mention that the seat is meant for one person.
These two are the best conversions I have found so far, based on my likes and dislikes. Great job guys! Thanks for the inspiration.
Let the breakdown begin! I spent a few hours this weekend dismantling the bike to see how deeply the rust had penetrated various parts. The original goal was to simply get the bike running in its current state and work slowly over time to fix it up while I worked out the engine by riding it. Well, my OCD kicked in and I couldn’t stand to see the rusty parts, so I decided that I would get it stripped down to the frame so I could get the frame powdercoated while I dealt with the surface rust inside the gas tank. Once the seat and tank were off I kept on going. I made sure to take many photos of each part before removing it so that when I put it back together I have something to refer to. I also ordered the Clymer Honda repair manual. It should be here in a couple of days.
After breaking down the bike I sent a couple of hours on the internet sourcing some of the parts I thought I might replace, but after looking at part sites and eBay I think some of the parts I thought were poor are actually not so bad, based on the junk people are trying to sell on eBay. It seems surface rust and dents are par for the course on CB350 parts this age and I will be better off sanding, sand-blasting, re-chroming and powdercoating some of the pieces with minor wear that I thought were throw-aways.
This is the bike after a few hours of breakdown:
And after an hour or so more, it was even lighter:
Now I can get the carbs off and rebuilt…
This past weekend The Missus and I drove over the mountains on a journey to pick up the 1971 Honda CB350 my good friend Loren had forwarded to me from Craigslist for my Cafe Racer Project. The day was a total success! Flea market in the morning and motorcycle purchase in the afternoon, all with the blessings of The Missus, who has warmed to the idea of riding on the back of a vintage motor bike, dressed in all the vintage regalia (of course).
The ad had stated the the bike would need a little work to get it running, but was in good shape otherwise. No other details were available. I had corresponded for a week via email arranging for the seller to hold the bike until I could pick it up and no details about the bike were discussed so I thought it would be good to go, even though the ad stated that the bike had no title. I figured that this was the reason that the bike was listed for a couple of weeks and was still available. When we arrived in the afternoon and I climbed out to look at the bike I had a bit of a sinking feeling, spying rust from across the driveway. The photo in the ad had been shot in such a way that it was not evident that there was any rust on the bike, only a little faded paint on the tank. I dove in and climbed under the bike for a closer inspection. After examining the details it looked as though most of the rust was surface rust and pitting on the chromed elements of the bike. The seller had oiled the carbs and freed up the wheel bearings so the motor turned over and the bike rolled. The only thing missing on the bike were the brake pads. Everything else was there and was original. I hemmed and hawed over the price for a bit and we came to an agreement that was pretty close to his asking price. He was stubborn, knowing that these bikes were gaining popularity and that there would be someone right behind me at this price that would take it off his hands. We shook, loaded the bike:
and The Missus and I headed back over the mountains with our new purchase staring at me in the rearview mirror.
The first step is to get the bike titled. I have all of the paperwork filled out and ready to go, so tomorrow is the DMV journey. Today I dragged the bike out for a complete photo documentation so I have reference where the bike was when I started. This is what the bike looks like today:
1971 Honda CB350 – Original Condition
Stay tuned for more episodes…
This past weekend was the weekend with the road trip to pick up my new Honda CB350 Cafe Racer Project (stay tuned for details). First the Missus and I had to stop by the Piccadilly Flea Market in Eugene, OR to see if we could find any vintage goodness. I hadn’t been to “The Pic” in years, but have friends that buy and sell there that keep me up to speed on quality of goods, so I knew it was ripe for the pickings. It was a successful pick, as I found a vintage hunting jacket within ten feet of the front door to start out the proceedings. We didn’t arrive until noon, so I was pleasantly surprised to see such a great find at all, let alone within ten feet of the front entrance. I will post the hunting jacket next, but first, the next little treasure I found was a vintage motorcycle shop jacket from the 70’s with fantastic graphics on the back and a chain-stitched name on the front.
The brand is Pla-Jac from Danbrooke, which is a new one to me. While the jacket looks like one of the cheap nylon giveaways, it is not. It is a light cotton jacket and the elastic is still in great shape. It isn’t heavy duty by any means, but will work great for breezy days. The only bummer for me is that, as usual, the jacket is a Medium (40-42) and I am more of a large, so perhaps the Missus gets to wear it now and then, although it will run big on her…
I may have just secured a 1971 Honda CB350 for a cafe racer project. It is the red one in this photo.
Stay tuned for details…